Mastersil SMP50

A high performance modified polymer, designed for demanding applications in the assembly market.

MASTERSIL SMP50 is a silane modified polymer sealant technology with excellent UV Resistance. Isocyanate solvent free, high strength and specifically designed for the OEM transportation, automotive, vehicle assembly, marine, and manufacturing industries

 

low VOC approved

 

Category:

Description

MASTERSIL SMP50 is a silane modified polymer technology with excellent UV Resistance. MASTERSIL SMP50 is isocyanate solvent free, fast curing, highly flexible and specifically designed for
semi structural bonding applications in the OEM transportation, automotive, vehicle assembly, marine, industrial and manufacturing industries.
MASTERSIL SMP50 displays excellent adhesion to many substrates common to the automotive and manufacturing sectors, such as metals, composites, thermoplastics and fibreglass. MASTERSIL SMP50 is specifically designed to achieve a high Shore A hardness once cured, creating a rigid, semi structural, high strength and flexible bond line between various substrates with lower dynamic movement With advanced chemical composition, MASTERSIL SMP50 has been manufactured to allow for “Primer less” bonding to difficult substrates while achieving a high level of chemical and salt water resistance.

FEATURES

  • Solvent & isocyanate free
  • Excellent adhesion
  • Excellent UV Resistance
  • Bonds a wide variety of substrates
  • Permanently flexible
  • High strength
  • Good chemical resistance
  • Paintable

TECHNICAL

SPECIFICATIONS 
TypeThixotropic Paste
Skin Time10-15 mins
Tack Free40 mins
Tensile Strength2.0mPa (290PSi)
Hardness 50 Shore A
Application Temp5°C to 40°C
UsesInternal / External

  • LOW VOC (< 50 gm/l) In accordance with the Californian South Air Quality Management rule 1168

SUBSTRATES

MASTERSIL SMP50 has excellent adhesion to many substrates. Admil Adhesives always recommends to conduct “Pre-Adhesion” Tests on substrates to ensure adequate bond is achieved.

  • Glass
  • Aluminium
  • Galvanised steel
  • Concrete
  • Wood
  • Ceramics plastics
  • Most powder coatings
  • Fibreglass
  • Steel
  • Stainless steel
  • Zincalume
  • Roofing profiles

 

SURFACE PREPARATION

All surfaces must be clean, dry, sound, and free from dust, oil, rust, or any other contamination.

Metals should be cleaned with a non-oily solvent soaked clean cloth, such as PROSIL CLEANER 1. Excess solvent should be wiped from the surface with a clean dry cloth. When used on remedial work all existing sealant must be removed. In some instances further cleaning or etching maybe required.

 

COLOURS

MASTERSIL SMP50  comes in the following colours to suit many trends and substrates.

BlackBlack silicone sealant
WhiteTranslucent Silicone sealant colour

* Colours may vary without notice or be unavailable. Please call your local representative or office to find out more

DOWNLOADS

TDS Download

SDS Download